Sash Lock Door Handles
If you're looking to improve the security of your home without sacrificing aesthetics choose doors with sash locks. They can be used with mortice locks or sash lock and can be combined with a nigh latch to provide extra locking for internal door.
These handles are an amalgamation of the lever and the handle mounted on a backplate. They can be used with three- or five-lever mortice locks. They can also be paired with tubular latches.
Lever Lock Handles
There are many different types of lever door handles to complement any decor. Rustic lever handles work well with a ranch or farmhouse style decor and are also popular in modern homes. Classic lever handles are either round or spherical and easy to hold. They are affordable, simple and can be used with any style of home design. Select polished or satin nickel chrome handles to create a sophisticated style. replacing window sashes are easy to clean and are durable. Other options include antique bronze and polished brass. Many handles feature decorative designs, like amber worm-eyes or long-horned cyrstals. Some levers have a pin, star or some other shape that is molded into the bottom.
To replace the lever lock door handles, you must have the right screwdriver, or tool to disassemble them. Depending on the model and design you may have to employ an awl, or nail to remove the lever handle. Some lever handles have an apex or notch on one side of the base that can be used to pry it open.
Follow the manufacturer's guidelines to remove your old handles once you have the correct tool. Check the spindle of the new lever. Doors that have been morticed (cut into the door) for previous latches or locks, and need to be fitted to a certain spindle size. Most lever handle manufacturers have a standardized door spindle size for handle.
If you are replacing the handle of a sash lock, the old handle must be removed and the tubular latch bolt which sits within the door, needs to be removed from the strike plate inside the door frame. You will then need to drill a hole into the door frame, insert the latch bolt into it, and connect it to the strike plate inside the door frame.
It is essential to keep in mind that when installing a new lever handle, all handles that comply with the ADA (Americans with Disabilities Act) are designed to operate with a hand. The user must not be required to hold their hands tightly or turn their wrists. In order to comply with ADA compliance standards, the lever door handle must be operated using only the thumb and finger or even the entire hand.
Sash Lock Handles
The main function of sash lock door handles is to pull the sashes that are moving together in a tight seal. This helps maintain the temperature of the house and stops drafts. They also work well for doors that don't need the security of the keyed locking system.
Mortice sashlocks are sash locks that incorporate deadbolt and latch in one case. They are fitted to the door's material. They are often used in conjunction with door handles and come in a range of choices.
Lever lock handle works with the lever that is mounted on a backplate cut out below it, which allows a key to be inserted to open the mortice sash lock. This lock is typically used on doors that do not lock, like those in dining rooms and living rooms. However it is also possible to use with a tubular lock for a more secure door.
These are designed to keep the sash together at multiple points, and have a hook that fits inside the keeper. They are available in a variety of styles and designs that can be fitted into different types of windows, such as sliding or hinged casement windows. Some are made of cast aluminum while others are made of brass or iron. They're available in a range of finishes to complement other components of your door furniture, such as escutcheon plates that guard the keyhole.
3 lever sash locks are suitable for doors that are internal but not external ones, because they lack the security level required by insurance companies. They are also less vulnerable to forced entry than their five lever counterparts, making them more vulnerable.
A door sash that has five levers is the best choice for exterior doors. It provides higher levels of resistance to forced entry, and is more difficult to pick or bypass. The locks are upgraded in design that's been tested and certified to comply with the strictest security, fire and disability regulations.
The first step to replacing a sash lock handle is to remove the old fastener by taking the screws from both ends. Make sure you have a screwdriver on hand and take care to separate the components so that you don't damage them. Use a pencil to mark the location of the screw holes, so you can place the new fastener correctly when it comes to fitting. Remove any dust or paint flecks, then screw in the new fastener. Test the handle to ensure it works correctly and creates an airtight seal.
Tubular Latch Handles
The tubular latch is an internal latch which is operated by turning the handle. It is designed to close a door but it does not secure it like mortices. They are most commonly used on internal doors, in which locking is not needed. They can be fitted with knob or lever handles.
Tubular latches are available in various sizes. The sizes vary from basic to the expensive architectural. The size of the door depends on its purpose and whether it has locks. For example, a bathroom door may need to have a thumbturn and release mechanism in the event of emergency, so you'll require locks that are lockable.
The backset of your door will determine the latch you select. This is the distance between the edge of your door and the centre of the hole for the door handle rose/knob, and you should choose a latch that has a matching backset measurement. This will ensure your handle/door knobs can operate the latch without a hitch.
If you are installing a knob or lever that has a spring or not spring, it's crucial to select a tubular latch that is heavy-duty. It should come with a double-sprung follower. This will ensure a smooth and consistent latch action and will prevent it from becoming slow or unresponsive after regular use.
The next step is to mount the latch on the door. The first step is to ensure that the latch is level to the top of the door frame/casing. Then mark the location of the plate and drill holes. Countersink drill bits can aid in creating the right recess to allow it to fit comfortably.
Once the latch is set Once it is in place, you can screw it to the door. Before installing your door handles or locks, it is important to make sure that the latch is functioning properly. To check simply open and close the door a few times. If it's not working correctly try lubricating your door with WD40. Then re-try it. If you continue to experience issues, it could be necessary to call a professional installer or locksmith.
Keyhole Handles
Keyhole handles work with a tubular latch that is installed inside the door. The latch is used to open and shut the door. The handle is able to engage the latch when pushed down and releases it when pulled up. These handles are usually used on interior doors like those found in dining and living rooms. However they can also be fitted to front door if paired with a nightlatch.
Door knobs are more modern handles that combine a sprung lever/handle with a square or round fixing stem and a matching thumb-turn or escutcheon. They are available in a broad range of finishes and styles to match different doors in the home. They can be used in conjunction with Euro cylinders or multipoint locking systems for additional security. This is achieved by locking the door at several points on the height of the door. Door handles that are compatible with the lock are required with the correct dimensions for the center of the lock to fit the barrel.
A keyhole escutcheon is an enclosure for the door's existing keyhole that hides it from view and give a more stylish look to the handle. They can be purchased as a pop-on or screw-on design and come in a variety of finishes to match the door handle. Alternatively, a concealed escutcheon is able to be attached to the edge of the door to conceal the keyhole and create a more modern look.
The majority of the handles described above are designed to be used with either a mortice or sash lock mechanism, however some are compatible with Euro cylinder locks as well. These are used on uPVC doors and require compatible door handles that have a Euro cutout for the cylinder and appropriate screw holes in the backplate to accommodate the euro cylinder. These handles may also require an escutcheon for Euro-cylinders or a standard escutcheon according to the use.
If you decide to use mortice lock, sash lock or tubular latch for your door, it's important to understand the different features of each and the requirements they have for compatibility with the other components of your uPVC door system. You'll have to take into consideration the thickness of your door, door hinges and frame reinforcements as well as the backplate of the door handle size, the dimensions of the lock centre and the screw centres for the cylinder.